Power2Max NGeco Road Power Meter - Easton
| $ 1099.00 | |
| Bolt Circle Diameter | |
| QTY | |
| SKU | LM-NER-EAS00-001.114L |
Back ordered | |
WARNING
This product Contains a Button/Coin Battery. A lithium battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body. Keep batteries out of reach of children. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.
The NGeco Road Easton power meter spider is the power meter for all cyclist who already use a Easton EC90 or EA90 crank set. The Powermeter can be easily mounted on your existing and compatible Easton crank. All you need are the appropriate chainring bolts and chainrings.
With the bolt circles (BCD) 110 and 130 you can mount classic 5-hole chainrings, whereas bolt circles 110 4-S and 110 4-SL allow you to mount Shimano 11-speed and 12-speed chainrings.
With approx. 125g for the Powermeter, the 110 4-SL version in combination with an Easton EC90 crank is currently our lightest Powermeter crankset combination and approx. 30g lighter than the "classic" 110 4-S version.
NOT SURE WHICH P2M POWER METER FOR ROAD IS RIGHT FOR YOU?
Check this guide - https://www.power2max.com/en/p2m-road-powermeter/
- SPECIFICATIONS -
Physical
- Weight: 133g (4-SL)
- Fitment options (BCD) - 110-4SL (i.e. Shimano RD 4-bolt)
- Water Resistant: yes
Battery
- Type: CR2450 coin cell (replaceable)
- Life: up to 300 hrs
Data
- Metrics: power, cadence
- Power Accuracy: +/- 2%
- Torque: 0 - 250 Nm
- Power: 10 - 2999 W
- Cadence: 20 - 250 RPM
- Data Transmission: ANT+, BLE
- Active temperature compensation: yes
- Calibration: automatic zero-point adjustment (no user calibration required!)
Compatibility
- Crankset: a fitting Easton crankset with removable spider and a cinch interface is needed.
- Fitment: recommend Loctite 243 or similar threadlocker
- Torque: 1 - 2nm
Other
- Manufacturer's Warranty: 5 years (NG model) / 2 years (NGeco model)
- INCLUDES -
- Powermeter
- Silicon cover
- Quickstart guide
POWER2MAX WARRANTY INFORMATION
POWER2MAX guarantee their products to be free of manufacture defects, to the original purchaser, for 2 years.
This warranty does NOT cover normal wear and tear, incorrect installation, modification or products which have been otherwise tampered with, and crashed products.
All POWER2MAX products must be assessed by the manufacturer prior to warranty decisions being made.Dealers are not authorized to replace POWER2MAX products without prior approval or evaluation.If you have a POWER2MAX product that you believe should be considered for warranty, please take it back to the retailer you purchased from with your dated receipt – OR – contact POWER2MAX directly via their support page. https://www.power2max.com/en/warranty/
For more information and installation instructions, please refer to the following; https://www.power2max.com/en/faqs/
Start a warranty process
| Select model |
